TARS
Problem · iPhone

iPhone alarm not going off: the nine causes, in the order to check them

Silent mode and Do Not Disturb do not stop the Clock app's alarm, so the cause is usually elsewhere. A volume slider, a sound set to None, a face the phone recognised, or a third-party app that was only ever a notification. The list below gives what Apple says about each.

Updated · by the TARS team, I12Y LTD

An iPhone alarm that does not go off has one of nine causes. The Ringtone and Alerts volume is low, the alarm sound is set to None, or Attention Aware lowered the volume. The time was changed by hand, or the alarm belongs to a sleep schedule that is off. Alarm apps add one more: a Focus silenced their notification.

Symptom, likely cause, where to fix it

What you sawLikely causeWhere to fix it
Nothing at all, phone was next to the bedAlarm off, set for the wrong day, or AM and PM swapped.Clock app, Alarms. Check the switch and the Repeat days.
The phone buzzed but made no soundAlarm sound set to None. Apple: if your alarm only vibrates, make sure the sound is not set to None.Clock app, tap the alarm, Sound.
Very quiet, even on a loud toneRingtone and Alerts volume is low. The side buttons only change it when Change with Buttons is on.Settings, Sounds & Haptics.
It went quiet as soon as you picked up the phoneAttention Aware. Apple: when attention is detected, your iPhone lowers the volume of your alerts.Settings, Face ID & Passcode, Attention Aware Features.
Sound came out of the earbuds onlyApple says the alarm plays through the built-in speakers and the headphones at a set volume. If you heard nothing from the speaker, the volume is the cause, not the headphones.Settings, Sounds & Haptics.
Alarm rang at the wrong timeThe clock was changed by hand. Apple: manually adjusting the time to change app behaviour can affect alarms.Settings, General, Date & Time, Set Automatically.
The wake up alarm of a sleep schedule did not ringSleep schedule alarms live in the Health app and can be turned off separately from Clock alarms.Health app, Browse, Sleep, Your Schedule.
No vibration on the nightstand chargerApple: when you use StandBy, haptics for your alarms are disabled.Add a sound to the alarm, or charge the phone off StandBy.
A third-party alarm app stayed silentBefore iOS 26 such apps rang through notifications, which Silent mode or a Focus can silence.Allow the app in your Focus, or use an app built on AlarmKit.

The Apple statements in this table come from Apple Support's alarm article (published April 2, 2026), the iPhone User Guide, and the Attention Aware article. All were read on October 22, 2026. We make TARS, which is mentioned once below.

iPhone alarm not going off after the iOS 27.2.1 update

Apple released iOS 27.2.1 on November 9, 2026. The next morning people on r/iphone were asking whether their alarm had failed after the update. If yours stayed quiet, go through these six checks in order. Each one takes less than a minute.

First, what does not cause it

Apple's alarm article is clear on three things. Do Not Disturb, the Ring/Silent switch and Silent mode do not affect the alarm sound. The alarm still sounds if you use the Action button to turn on Silent mode. And with headphones connected, the alarm plays through the speakers and the headphones.

So if the Clock app's alarm did not ring, it was not the switch and not a Focus. Our guide to whether the iPhone alarm goes off on silent shows what Silent mode does and does not mute. That leaves the volume, the alarm itself, and the way the phone decided you were already awake.

The three settings behind most cases

Two alarm systems on one phone

The Clock app and the Health app each have alarms. Apple's guide says any alarm you set in Clock is unrelated to a sleep schedule. The sleep schedule's wake up alarm can be turned off for one night, for one schedule, or for all schedules, from Health. If your morning alarm is the sleep schedule kind, a change in Health is the first place to look.

The safest setup is one alarm you understand. Either a Clock alarm with Repeat days, or a sleep schedule with its alarm on, and not both at different times.

Why third-party alarm apps fail in a different way

Until iOS 26, an alarm app could not ring like the Clock app. It sent a notification with a short sound, and a Focus can silence notifications. Apple's Focus guide says a Focus can temporarily silence all notifications or allow only specific ones. A Sleep Focus that starts at bedtime is the usual culprit.

In iOS 26 Apple added AlarmKit, a framework for prominent alarms and countdowns that apps can schedule the way Clock does. Apps that state they are built on it include AlarmK, Rooster, MeetAlarm and TARS (the full list of AlarmKit apps). If your alarm app requires iOS 17 or 18 and says nothing about AlarmKit, it still rings through notifications on those versions. Allow it in every Focus you use at night, or switch.

The two-minute test before you trust it again

If the alarm rang and you still did not get up

That is a different problem. The sound got through and you dismissed it half asleep. Volume will not fix it. You need something after the first ring: a task, a second check, or a voice that waits for an answer. The alarm that makes sure you are awake guide covers the apps that do this.

TARS, which we make, is one of them. It is an AlarmKit alarm that speaks a wake-up line and has no snooze button. With TARS+ it rings again if you do not confirm you are up.

FAQ

Does the iPhone alarm go off on Silent?

Yes. Apple's alarm article says Do Not Disturb, the Ring/Silent switch and Silent mode do not affect the alarm sound. This applies to the Clock app. Third-party apps that ring through notifications can be silenced by a Focus unless they use AlarmKit on iOS 26.

Why did my alarm not go off after an iOS update?

Apple's article does not list updates as a cause. After an update, check the Ringtone and Alerts volume, the alarm sound, and whether a sleep schedule alarm was turned off. Then set a test alarm two minutes ahead.

Why does my alarm get quiet when I pick up the phone?

Attention Aware. Apple says that when attention is detected, the iPhone lowers the volume of your alerts. Turn it off in Settings, Face ID & Passcode, Attention Aware Features.

Will the alarm ring with AirPods or headphones connected?

Apple says the alarm plays at a set volume through the built-in speakers as well as wired and wireless headphones. If you heard nothing from the speaker, check the alert volume.

Why does my alarm only vibrate?

Its sound is set to None. Open the alarm in Clock and choose a sound. Note that in StandBy, alarm haptics are disabled, so a vibrate-only alarm on a nightstand charger does nothing.

An alarm that rings, then checks you are up

TARS is built on Apple's AlarmKit, so Silent mode and Focus do not stop it. It speaks a wake-up line, has no snooze, and TARS+ rings again if you do not answer. Free alarm, no account, iOS 26.1 or later.

Download on the App Store

Sources

More guides